GEOVENT Centrifugal & Portable Fans
We supply the full range of GEOVENT centrifugal fans for industrial processes with air volumes up to 55.000 m³/h.
Manufactured in house in Denmark, GEOVENT offer a large selection of standard products in stock.
Centrifugal Fan Range
LSFG / MSFG Centrifugal Fan
LSX / MSX Centrifugal ATEX Fan
LSFG / MSFG Centrifugal Fan
LSFG-MSFG NGE
The range consists of both low pressure (LSFG) and medium pressure (MSFG) centrifugal fans.
The fans are suitable for non-material handling applications, such as general ventilation, welding fume, soldering fume, exhaust fume and various other applications.
Technical Specification
- corrosion resistant galvanised steel fan case.
- Forward curved galvanised steel impeller
- MAX Airflow 4,900 m3/hr
- MAX Pressure - 1840 Pa
- BZP fixings
- direct drive motor.
- Single and three phase versions available.
LEF / MEF Centrifugal Fan
LSX / MSX Centrifugal ATEX Fan
LSFG / MSFG Centrifugal Fan
LEF-MEF - Energy Saver
The LEF and MEF range of centrifugal fans are fitted with backward curved, self-cleaning impellers, with air flows up to 24,000 m³/h.
The LEF-MEF fan is also available in stainless steel with epoxy painted impeller and inlet.
Technical Specification
- corrosion resistant galvanised steel fan case.
- Backward curved galvanised steel impeller
- MAX Airflow 24,100 m3/hr
- MAX Pressure - 4500 Pa
- BZP fixings
- direct drive motor.
- Single and three phase versions available.
LSX / MSX Centrifugal ATEX Fan
LSX / MSX Centrifugal ATEX Fan
LSX / MSX Centrifugal ATEX Fan
LSX / MSX ATEX Fan
The range consists of both low pressure (LSX) and medium pressure (MSX) centrifugal fans.
The fans are suitable for non-material handling applications.
Technical Specification
- corrosion resistant galvanised steel fan case.
- Forward curved galvanised steel impeller
- MAX Airflow 4,900 m3/hr
- MAX Pressure - 1840 Pa
- Non Sparking Inlet
- Anti Static features
- BZP fixings
- direct drive motor
- Three phase only
LEX / MEX Centrifugal ATEX Fan
LSX / MSX Centrifugal ATEX Fan
LEX / MEX ATEX
The energy saving fan!
The LEX and MEX range of centrifugal fans are fitted with backward curved, self-cleaning impellers, with air flows up to 24,000 m³/h.
The LEX-MEX fan is also available in stainless steel with epoxy painted impeller and inlet.
Technical Specification
- corrosion resistant galvanised steel fan case.
- Backward curved galvanised steel impeller
- MAX Airflow 24,100 m3/hr
- MAX Pressure - 4500 Pa
- non-sparking inlet
- Anti static features
- BZP fixings
- direct drive motor
- Three phase only
MSQ-200 Direct Mounting Fan
MSQ-200 direct mounting fan
The MSQ-200 centrifugal fan is used for the direct mounting of an extraction arm or hose reel.
With the help of an adaptor the MSQ-200 can be mounted direct to WING and COMPACT extraction arms and GTS and GTE on hose reels.
This fan has a performance capacity of approx. 1400 m³/h. It is supplied with motors of 3 x 400V and 1 x 230V
Technical Specification
- corrosion resistant galvanised steel fan case.
- Forward curved galvanised steel impeller
- MAX Airflow 1400m3/hr
- BZP fixings
- direct drive motor.
- Single and three phase versions available
Polypropylene Fan Range
Polypropylene Fan Range
The range consists of three types of fan (RPV,LPV & MPV) fabricated from corrosion resistant polypropylene.
These fans are designed for the extraction of both non-corrosive and corrosive gases, fumes & vapours.
Technical Specification
- corrosion resistant polypropylene fan case
- Backward Curved polypropylene impeller
- MAX Airflow 6,750 m3/hr
- MAX Pressure - 1700Pa
- Stainless Steel fixings
- powder coated sheet steel motor pedestal.
- direct drive asynchronous motor.
- ATEX version available for zone 2/22 in accordance with directive 2014/34/EU
- Single phase versions available upon request
GEOVENT Portable Fans
PM180 - Portable Fan
PM-180 Portable Fan
This portable unit is suitable for the extraction of welding fumes, smoke and vapours etc, in locations where a fixed extraction system is not suitable.
Technical Specification
- corrosion resistant galvanised steel fan case, with powder coated mild steel cover.
- Forward curved galvanised steel impeller
- MAX Airflow 1400m3/hr - without hose
- BZP fixings
- Single phase - 230V
- 0.55 kW •
- start/stop switch and circuit breaker
- Air flow with normal use of hose: 600 m³/h (ø125mm) 800 m³/h (ø160mm).
- Air flow with fully extended hose: 700 m³/h (ø125mm) 1100 m³/h (ø160mm)
- 2 x 5 m ø125mm or ø160 mm flexible and light-weight hose with socket fittings for easy assembly & disassembly.
- Epoxy coated hood with heavy duty magnet.
- ABS-plastic carrying handle
- Weight: 19.3kg
- Sound level: 68dB(A)
PM200 & 225 Portable Fan
PM-200 & PM-225 Portable Fan
This portable unit is suitable for the extraction of welding fumes, smoke and vapours etc, in locations where a fixed extraction system is not suitable.
A trolley with 2 wheels is available as an optional extra.
Technical Specification
PM-200 - Ø200 mm
Including 2 x 5m ø165 mm hose, hood with a magnet, thermal protection with a breaker, and a 10m cable for 230V with a plug.
- Weight: 30kg
- Sound level: 75dB(A)
- MAX Airflow 2100m3/hr - without hose
- Single phase 230V
- 1.1kW
PM225 - Ø225 mm
Including 2 x 5m ø200 mm hose, hood with a magnet, thermal protection with a breaker, and a 10m cable for 400V with a plug.
- Weight: 35kg
- Sound level: 75dB(A)
- MAX Airflow 2950m3/hr - without hose
- Three phase 400V
- 2.2kW